Name: 030-8-0016 K30 1% CO2 Sensor
SKU: 36093

The K30 1% CO2 Sensor (030-8-0016) is intended to be used to monitor up to 1% CO2 where the levels are constantly higher than normal but still within safety levels.

This sensor comes with the Automatic Background Calibration turned off. ABC only works when the sensor can regularly detect fresh air. If CO2 levels are always higher than outdoor air, this sensor will not drift. However, periodic manual calibration will be required.

Features

Simple to install, pre-calibrated and ready-to-use
Proven reliability, low cost
Maintenance free in normal applications
Flexible analog and digital outputs

Models

030-8-0016 - K30 1% CO2 Sensor Only - For integration into high-volume OEM products. Automatic Baseline Calibration (ABC) turned off.
Sensor Development Kit (CM-200) - Easy to use, simply plug the sensor into the PCB and plug it into your PC via USB. Use our free to measure and graph carbon dioxide or use our to build your own application or for OEM batch testing/configuration. Order sensors on this page, then .

We recommend that all first time users purchase both this sensor and the CM-200 Development Kit for fastest and easiest results.

Specifications

CO2 Measurement: non-dispersive infrared (NDIR)
Measurement Range: 0 – 10,000 ppm (0-5,000 ppm within specifications)
Rate of Measurement: every 2 seconds
Response Time Diffusion: 20 seconds
Response Time Sample Draw: 2 seconds @ .5 l/min tube gas flow
Warm-up Time: < 1 min. (@ full specs < 15 min)
Outputs. 2 analog, 2 digital
Scalable Analog voltage outputs
Each digital output has threshold and hysteresis
Programmable Range: 0-10,000 ppm (custom configuration required)
Repeatability: ± 20 ppm ± 1 % of measured value within specifications
Accuracy: ± 30 ppm ± 3 % of measured value within specifications
Maintenance Interval: no maintenance required
Self-Diagnostics: complete function check at startup
ABC (Automatic Background Calibration) enabled unless specified
Dimensions: 51 mm x 58 mm x 12 mm
Sensor Life Expectancy: > 15 years

Conforms with Standards

Emission: EN61000-6-3:2001
Immunity: EN61000-6-2:2001
RoHS directive 2002/95/EG

Electrical / Mechanical

Dimensions: 51 × 57 × 14 mm (Length x Width x approximate Height)
Power Input: 5.5-14 VDC, stabilized to within 10% (external protection circuits required)
Current Consumption: 40 mA average
Sampling Method: diffusion (tube cap optional)

Warranty

90 days - See

Accessories

- designed to provide customers with an easy drop-in solution. Includes our free . Sensor sold separately.
changes the sensor from reading CO2 in the air to a sample draw sensor. Use with a pump, tubing and filters to read CO2 levels in enclosed containers.
includes all the components you need with a sample draw sensor to create a closed CO2 measurement system.
. Includes hydrophobic filters, protects the sensor when used in hostile environments.